Instructions For Safe Use - Oce TDS400 Quick Reference Manual

Instructions for safe use

Attention:
conformance with the strictest international safety standards. However, to
help assure the safe operation of these products, it is important that:
You carry out maintenance only as far as prescribed in this manual.
■
You observe the following safety recommendations:
■
Maintenance
Do not remove any screws from fixed panels.
■
Do not place any liquids on the machine.
■
Use maintenance materials or other materials for their original purpose only.
■
Keep maintenance materials away from children.
To avoid damage and the risk of personal injury, all modifications to Océ
■
equipment are strictly reserved for properly qualified and trained service
technicians.
Power connection
If unforeseen circumstances force you to re-install the machine without the
■
assistance of Océ Service, make sure that the machine is connected to a
power outlet which is equipped with a fuse or circuit breaker with the
appropriate capacity.
Do not bridge any mechanical or electrical circuit breakers.
■
Do not use an extension cord to connect the machine.
■
This equipment is not designed for connection to an IT power system. (An
■
IT power system is a voltage network in which the neutral wire is not
connected to earth.)
For equipment connected via a wall outlet: place the machine close to an
■
easily accessible wall outlet.
For equipment connected to the electrical system via a permanent
■
connection: make sure that the disconnect device in the permanent
connection is easily accessible.
Products designed by Océ are developed and tested in
79