Oce TDS400 Quick Reference Manual page 12

[2] The power switch on the scanner
▼
Turn the controller on
Press the button on the front of the controller.
1
The controller turns on.
▼
Turn the controller off
Select the 'Shut down' option from the Océ System Control Panel. You can do
1
this through both the controller and through Océ Remote Logic
Switch off the controller and the monitor.
2
Set the power switch at the rear of the printer to position '0' (see Figure 1).
3
If you turn off the printer during a print job, you can loose
Note:
information or cause a paper jam.
If you turn the printer off, wait at least 5 seconds before you restart the
Note:
system.
12 Océ TDS400 Quick Reference Manual

.