Remote Jack Pack / Tv Connections & Setup - LG Pro Centric 37LT777H Commercial Mode Setup Manual

Reference: Remote Jack Pack / TV Connections & Setup
Remote Jack Pack Setup
RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093
RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE
to 1). See Installer Menu detailed descriptions for further information.
093 RJP AVAILABLE
TV Connections
Make these connections ONLY after Master TV Setup and TV cloning procedures are
complete.
Refer to the figure below, and connect the RJ-45 Control cable from the RJP cable bundle to the RJP
INTERFACE port on the TV's rear jack panel. Then, connect HDMI, RGB, and Composite Video/Audio
connectors, as applicable, for the cable bundle.
AUX LAN
LAN
Connect RGB connector
from RJP cable bundle
64
001
RJP INTERFACE
Connect RJ-45 Control cable
from RJP cable bundle.
SERVICE ONLY
RJP
INTERFACE
TV-LINK CFG
OPTICAL
AUDIO IN
DIGITAL
(RGB/DVI)
RGB IN (PC)
RS-232C
SPEAKER
OUT(8Ω)
(SERVICE & EXT POWER)
RGB IN (PC)
(legacy RJP only).
HDMI/DVI IN 1
Connect HDMI connector
from RJP cable bundle.
UPDATE
/ DVI IN
..........
2
RESET
..........
1
(ARC)
AV IN
GAME CONTROL
/MPI
ANTENNA/
CABLE IN
AUDIO/VIDEO IN
Connect Composite Video/Audio
connectors from RJP cable bundle.
(Composite Video on legacy RJP only.)
206-4234