Checking The Software Versions; Upgrading Tv/Ptc Software Using A Usb Memory Device - LG Pro Centric 37LT777H Commercial Mode Setup Manual

Reference: Upgrading TV/PTC Software using a USB Memory Device

Checking the Software Versions

You can check the software versions of the TV by accessing the Installer
Menu with the Installer Remote (see "Accessing the Installer Menu" on
page 21 for further information).
When you are finished, press OK again to exit the Installer Menu.
Upgrading TV/PTC Software
The following procedure describes how to update TV/PTC software using the USB
Download Menu, though you may also use the new LG Smart Install feature to
upgrade software, if desired. See "LG Smart Install Utility" on pages 19 to 20 for
further information.
Before you begin this procedure, note that the software upgrade files must be
stored in a folder named "LG_DTV" in the root directory of the USB memory
device. Also, ensure the USB device has been formatted with FAT format.
Note for TV Software Upgrade only: If the TV detects a later version of software
on the USB device, it will automatically display a dialog from which you can start the
software upgrade immediately. Otherwise, you can close the dialog, and access the
USB Download Menu as described below.
1. Turn ON the TV, and then insert the USB memory device into the USB IN port
on the TV.
2. Press MENU SETTINGS on the Installer Remote to display the TV setup
menus (TV is in Pass-through Mode) or the Function Menu (TV is not in Pass-
through Mode).
3. Use the arrow navigation keys to select/highlight either the Option menu icon from
the TV setup menus or the Lock menu icon from the Function Menu. Then, press
the number "7" key a total of seven times to display the USB Download Menu.
4. Use the Up/Down arrow keys to select Upgrade TV Software or Upgrade
PTC Software, as applicable, and press OK.
5. Select the appropriate option(s), depending on the type of upgrade:
• TV Software Upgrade: (See screen samples at right.) Select TV Software
Update from the first TV Software Update window. In the second TV Software
Update window, select/highlight the update file to install and press OK.
Note: Do not select Forced Update options unless you have been specifically
instructed to do so or have previous experience with Expert Software Updates.
• PTC Software Upgrade: In the PTC Software Update window, select/highlight
the update file to install and press OK.
Note: The PTC Software Update window is similar to the second TV Soft-
ware Update window, though there are no Forced Update options. Current
software version information is shown at the top and update files on the USB
device are listed at the bottom of the window.
The TV will show update completion progress in a new window. Do NOT remove
the USB device until the software upgrade is complete. When a TV or PTC software
upgrade is complete, the TV will reset itself with an automatic restart.
206-4234
Typical Installer Menu
UPN 000-000-000-000 ASIC D279
PTC V1.01.026 CPU V3.45.00
PTC Version CPU Version
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Diagnostics
Teach To TV (TLL)
Teach To TV (TLX)
Previous
Note: The Diagnostics option in
this menu is for service use only.
TV Software Update (Expert)
TV Software Update
LOGO Image Download
TV Software Update (Expert)
[ Current TV Software Version Information ]
EPK : 03.44.00
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
EPK: 3.45.00
[Forced Update Option]
Ext. MICOM
LOGO Image
xxLT777H_v3_45_USB
OK
65