Remote Jack Pack / Tv Connections & Setup - LG 42LP870H Setup Manual

Reference: Remote Jack Pack / TV Connections & Setup
Remote Jack Pack Setup
RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093
RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE
to 1). See Installer Menu detailed descriptions for further information.
093 RJP AVAILABLE
TV Connections
Make these connections ONLY after Master TV Setup and TV cloning procedures are
complete.
Refer to the figure below, and connect the RJ-45 Control cable from the RJP cable bundle to the RJP
INTERFACE port on the TV's rear jack panel. Then, connect HDMI, RGB, and Composite Video/Audio
connectors, as applicable, for the cable bundle.
RGB IN (PC)
Connect RGB connector
from RJP cable bundle
(legacy RJP only).
64
001
AUX LAN
SPEAKER OUT
LINE OUT
LAN
OPTICAL AUDIO OUT SERVICE ONLY
Use A/V adapter cable provided with TV,
and connect Composite Video/Audio
connectors from RJP cable bundle.
(Composite Video on legacy RJP only.)
HDMI/DVI IN 1
Connect HDMI connector
from RJP cable bundle.
/ DVI IN
.......... ..........
1 2
(ARC)
RS-232C
(SERVICE & EXT POWER)
/ DVI IN
..........
3
RGB IN (PC)
RJP
AUDIO IN
AV IN
(RGB/DVI)
GAME CONTROL
/ MPI
TV-LINK CFG
AUDIO/VIDEO IN
ANTENNA/
CABLE IN
RESET UPDATE
RJP INTERFACE
Connect RJ-45 Control
cable from RJP cable
bundle.
206-4235