Pro:centric Setup; Pro:centric Operation - LG Pro Centric 37LT777H Commercial Mode Setup Manual

Pro:Centric Operation (Cont.)

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must be
specified on the TVs.
On the TVs, the Pro:Centric server settings must be configured appropriately to enable Pro:Centric remote
management/administration facilities, while the Pro:Centric Application Mode must be set appropriately to
enable the Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric Admin Client.
The Pro:Centric server settings can be configured using one of the following methods:
• When the TV is in a factory default state, the EZ-Manager Wizard provides automated or manual
options for configuring the Pro:Centric server settings.
The EZ-Manager Wizard also provides a USB Configuration option that enables you to configure a TV
for FTG Mode via CPU using an FTG Configuration (.tlx) file stored on a USB memory device. The FTG
Configuration file incorporates FTG Installer Menu settings, which includes Installer Menu items 098
PRO:CENTRIC and 119 DATA CHANNEL.
Refer to "EZ-Manager Wizard" on pages 11 to 18 for further information on the EZ-Manager Wizard
options.
• If the TV is in Pass-through Mode, either:
− Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
Refer to "Installer Menu" information on pages 21 to 30 for further information. Also, as necessary,
refer to "Custom Master TV Setup" information on pages 31 to 34 and/or cloning information on pages
36 to 44.
− Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You
must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See
"Accessing the IP Environment Menu" on page 56 and "Pro:Centric Setup" on page 60 for further
information.
Note: When the TV is in either Pass-through Mode or FTG Mode via CPU, you can also leave Installer
Menu item 119 DATA CHANNEL set to its default value (255) to enable the TV's Data Channel Auto
Search feature to set the DATA CHANNEL value. See item 119 description on page 30 for additional
information.
• If the TV is in FTG Mode (via CPU or EBL), use the appropriate software to update the Data Channel and
Pro:Centric Installer Menu items (along with their affiliated fields) and then transfer the FTG Installer Menu
settings to the TV in accordance with the FTG Mode of configuration. Refer to "FTG Mode of Operation
Overview" on pages 45 to 46 for further information on FTG Mode operation and configuration. Also—for
FTG Mode via CPU only—see note above regarding the option to use the TV's Data Channel Auto Search
feature to set the DATA CHANNEL value.
10
206-4234