Compressor Fx2.0 - Tascam DM-4800 Manual

Parameter Indicator
Cross feedback Fbk X-Feed
amount
Output wet Wet X-Feed
cross feed
Mixture Mixture

COMPRESSOR FX2.0

This stereo compressor features feed forward and
Parameter Indicator
Attack time Attack
Release time Release
Compression Ratio
ratio
Threshold Threshold
Compressor CompType
type
Range
0% - 100% (1% steps)
0% - 100% (1% steps)
0% - 100% (1% steps)
Table 1.5: Stereo Compressor parameters
Range
0 ms - 125 ms (1 ms steps)
5 ms - 5000 ms (1 ms steps)
1:1 - 1:infinity
–40.0 dB - 0.0 dB (0.1 dB steps)
FeedForward, FeedBack
Effect parameter list
Description
Specifies amount of L (R)
channel feedback signal
sent to R (L) channel
feedback path.
Specifies pan for L/R wet
channel outputs.
Specifies mix ratio of
dry feedback delay sig -
nal and LFO modulation
signal.
feedback types, and RMS and Peak level detect
modes.
Description
Specifies time taken for
compression to be ap -
plied after input signal
level exceeds user-
defined threshold.
Specifies time taken
for compression to be
released after input sig -
nal level reaches below
user-defined threshold.
Specifies ratio of com -
pression applied to in -
put signal that exceeds
user-defined threshold.
Specifies signal level
that triggers compres -
sor.
Specifies type of com -
pressor. With FeedFor -
ward, signal that passed
level detector is com -
pressed. With FeedBack,
signal before level
detector is compressed.
TASCAM DM-4800 Effect list
Remarks
With 0%, L channel wet
signal is output from L
channel, and R channel
wet signal is output
from R channel. With
100%, L channel wet
signal is output from R
channel and R channel
wet signal is output
from L channel.
Remarks
With FeedBack, com -
pression will be applied
lightly.