Phaser Fx2.0 - Tascam DM-4800 Manual

PHASER FX2.0

The stereo phaser offers five LFO waveforms.
Parameter Indicator
LFO rate LFO Rate
Negative (Yin) Yin Depth
LFO depth
Positive (Yang) Yang Depth
LFO depth
Master MasterRes
resonance
LFO waveform LFO Type
type
Negative (Yin) Yin Stages
stage
Positive (Yang) Yang
stage Stages
Negative and Yin/Yang
positive mix Mix
balance
Negative (Yin) Yin Res
resonance
Negative (Yin) Yin Invert
phase inversion
Positive (Yang) Yang Res
resonance
Positive (Yang) Yang Invert
phase inversion
Table 1.11: Stereo Phaser parameters
Range
Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps)
0.0% - 100.0% (0.1% steps)
0.0% - 100.0% (0.1% steps)
0.0% - 200.0% (0.1% steps)
Off, Sine, Triangle, Sawtooth Up, Sawtooth
Down, Square
1 stage - 32 stages (1 stage steps)
1 stage - 32 stages (1 stage steps)
0% - 100% (1% steps)
0.0% - 100% (0.1% steps)
Off, On
0.0% - 100% (0.1% steps)
Off, On
Effect parameter list
Description
Specifies LFO frequency.
Specifies modulation
depth of negative side
of LFO.
Specifies modulation
depth of positive side of
LFO.
Sets relative balance
between negative and
positive sides.
Specifies LFO waveform
type.
Specifies the number of
stages for all-pass filter
cascaded on the nega -
tive side.
Specifies the number of
stages for all-pass filter
cascaded on the positive
side.
Sets relative balance
between negative and
positive sides before
mix.
Specifies resonance
(filter efficiency) of each
all-pass filter stage.
Determines whether or
not the output phase of
the audio path of nega -
tive all-pass filter will be
inverted.
Specifies resonance
(filter efficiency) of each
all-pass filter stage.
Determines whether or
not the output phase of
the audio path of posi -
tive all-pass filter will be
inverted.
TASCAM DM-4800 Effect list
Remarks
1