Stereo Flanger Fx2.0 - Tascam DM-4800 Manual

Parameter Indicator
Low shelving LoShelfFreq
filter frequency
Low shelving LoShelfGain
filter gain
High shelving HiShelfFreq
filter frequency
High shelving HiShelfGain
filter gain
Wet signal Wet Pan
output pan
Dry signal Dry Pan
output pan
R output phase Wide Mode
inversion

STEREO FLANGER FX2.0

This flanger effect features stereo-in and stereo-
out. It uses the same algorithm as the chorus effects
Parameter Indicator
L channel LFO L LfoRate
rate
L channel LFO L LfoDepth
depth
L channel L PreDly
pre-delay
L channel L FbkAmt
feedback
amount
R channel LFO R LfoRate
rate
R channel LFO R LfoDepth
depth
R channel R PreDly
pre-delay
Range
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
100%L - Center - 100%R (1% steps)
100%L - Center - 100%R (1% steps)
Off, On
Table 1.4: Stereo Flanger parameters
Range
Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps)
0.0% - 100.0% (0.1% steps)
0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps)
0% - 90% (1% steps)
Linked, Freeze, 0.01 Hz - 30.00 Hz
(0.01 Hz steps)
Linked, 0.0% - 100.0% (0.1% steps)
Linked, 0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps)
Effect parameter list
Description
Specifies low shelving
filter corner frequency.
Specifies low shelving
filter gain.
Specifies high shelving
filter corner frequency.
Specifies high shelving
filter gain.
Specifies pan for wet
signal output to L and R
channels.
Specifies pan for dry
signal output to L and R
channels.
Determines whether
or not phase of right
channel output will be
inverted.
and the parameters are identical to the stereo chorus
parameters.
Description
Specifies LFO frequency.
Specifies LFO modula -
tion depth.
Specifies time between
onset of original sound
onset of the effect
sound.
Specifies amount of
delay line output signal
returned to delay line
input.
Specifies LFO frequency.
Specifies LFO modula -
tion depth.
Specifies time between
onset of original sound
and onset of the effect
sound.
TASCAM DM-4800 Effect list
Remarks
This filter is applied to
feedback loops.
This filter is applied to
feedback loops.
This filter is applied to
feedback loops.
This filter is applied to
feedback loops.
Remarks