Distortion Fx2.0 - Tascam DM-4800 Manual

Parameter Indicator
Tap 8 gain Tap8Gain
amount

DISTORTION FX2.0

This mono distortion enables pre-amp or power amp
modeling.
Parameter Indicator
Pre-amp gain PreAmpGain
Pre-amp drive PreAmp
Drive
Power amp PwrAmp
gain Gain
Power amp PwrAmp
drive Drive
Routing Routing
Asymmetry Asymmetry
Morph Morph
Pre EQ type PreEq Type
Pre low filter Pre Low
gain
Pre mid filter Pre Mid
gain
Range
0% - 100% (1% steps)
Table 1.9: Mono Distortion parameters
Range
0.00 - 11.00 (0.01 steps)
0.00 - 11.00 (0.01 steps)
0.00 - 11.00 (0.01 steps)
0.00 - 11.00 (0.01 steps)
PreAmp+PwrAmp, PreAmp->PwrAmp,
PwrAmp->PreAmp, PreAmp, PowerAmp
–100.0% - 100.0% (0.2% steps)
0.0% - 100.0% (0.1% steps)
Parametric, Shelving, Stack, Big Bottom,
Wide, Phat Mid
–15 dB - +15 dB (0.1 dB steps)
–15 dB - +15 dB (0.1 dB steps)
Effect parameter list
Description
Specifies amount of
audio signals feedback
from this tap to delay
input.
Description
Specifies input gain at With the maximum set -
pre-amp section. ting (11.00), the input
signal gain is multiplied
110 times.
Sets distortion at pre-
amp section.
Specifies input gain at With the maximum set -
power amp section. ting (11.00), the input
signal gain is multiplied
110 times.
Sets distortion at power
amp section.
Sets distortion routing.
Adjusts DC offset at
power amp section.
Specifies mix bal -
ance between pre-
amp distortion and
power amp distortion
when Routing is set to
PreAmp+PwrAmp. If the
value is closer to 0%,
more power amp distor -
tion, and if it is closer
to 100%, more pre-amp
distortion.
Selects a preset com -
bination of pre filter
frequency and Q.
Specifies pre low filter
gain.
Specifies pre mid filter
gain.
TASCAM DM-4800 Effect list
Remarks
Remarks
1