Mono Delay Fx2.0 - Tascam DM-4800 Manual

Parameter Indicator
Band 1 low-pass LoPass1
filter frequency Freq
Band 2 HiPass2
high-pass filter Freq
frequency
Band 2 low-pass LoPass2
filter frequency Freq
Band 3 HiPass3
high-pass filter Freq
frequency
Band 3 low-pass LoPass3
filter frequency Freq

MONO DELAY FX2.0

This mono delay enables you to set a delay time
Parameter Indicator
Delay time DelayTime
Feedback delay FbkDlyTime
time
Feedback Feedback
amount Amt
Feedback phase InvertFbk
inversion
Low shelving LoShelfFreq
filter frequency
Low shelving LoShelfGain
filter gain
High shelving HiShelfFreq
filter frequency
High shelving HiShelfGain
filter gain
Wet signal Wet Pan
output pan
Dry signal Dry Pan
output pan
Range
1.00 kHz - 10.00 kHz (1 cent steps)
1.00 kHz - 10.00 kHz (1 cent steps)
1.00 kHz - 10.00 kHz (1 cent steps)
1.00 kHz - 10.00 kHz (1 cent steps)
1.00 kHz - 10.00 kHz (1 cent steps)
Table 1.7: Mono Delay parameters
Range
1 ms - 2700 ms (1 ms steps)
Linked, 1 ms - 2700 ms (1 ms steps)
0% - 90% (1% steps)
Off, On
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
100%L - Center - 100%R (1% steps)
100%L - Center - 100%R (1% steps)
Effect parameter list
Description
Specifies the low-pass
filter corner frequency.
Specifies high-pass filter
corner frequency.
Specifies low-pass filter
corner frequency.
Specifies high-pass filter
corner frequency.
Specifies low-pass filter
corner frequency.
equal to twice the stereo delay time, and control vari-
ous parameters related to the envelope follower.
Description
Specifies delay time be -
fore initial echo begins.
Specifies delay time
after initial echo occurs.
Specifies amount of
audio signal returned to
delay input.
Determines whether
or not feedback signal
phase will be inverted.
Specifies low shelving
filter frequency.
Specifies low shelving
filter gain.
Specifies high shelving
filter frequency.
Specifies high shelving
filter gain.
Specifies pan for wet
(delayed) audio output.
Specifies pan for dry
audio output.
TASCAM DM-4800 Effect list
Remarks
Band 1
Band 2
Band 2
Band 3
Band 3
Remarks
With Linked, all echoes
follow delay time pa -
rameter setting.
This filter is applied to
feedback loops.
This filter is applied to
feedback loops.
This filter is applied to
feedback loops.
This filter is applied to
feedback loops.
11