Stereo Delay Fx2.0 - Tascam DM-4800 Manual

Parameter Indicator
Gate close GateClose
threshold
a) In Normal Envelope mode, the envelope follower output level is relative to the audio input level. In Inverted Enve -
lope mode, the envelope follower output level is maximized when no audio exists, and the output level declines as the
audio input level rises. In Normal Gate mode, the envelope follower output level becomes zero when the audio input
level does not reach the open threshold. The envelope follower level is maximized when the audio input level exceeds
the gate close threshold. In Inverted Gate mode, the envelope follower output level is maximized when the audio input
level does not reach the open threshold. The envelope follower level is zero when the audio input level exceeds the
gate close threshold.

STEREO DELAY FX2.0

This stereo delay enables you to create a multi-tap
delay sound using five delay taps.
Parameter Indicator
Master tap MstrTap
delay ratio Ratio
Master MstrFbk
feedback
amount
Delay type Delay Type
Low shelving LoShelfFreq
filter frequency
Low shelving LoShelfGain
filter gain
High shelving HiShelfFreq
filter frequency
High shelving HiShelfGain
filter gain
Tap 1 delay Tap1
time DlyTime
Tap 2 delay Tap2
time DlyTime
Range
0.0% - 100.0% (0.1% steps)
Table 1.8: Stereo Delay parameters
Range
0% - 200% (1% steps)
0% - 90% (1% steps)
Stereo, PingPong
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
Off - 1350 ms (1 ms steps)
Off - 1350 ms (1 ms steps)
Effect parameter list
Description
Specifies the threshold
at which the envelope
follower gate is closed.
Description
Specifies delay time For example, when you
ratio between each tap. are making a rhythm
pattern with differ -
ent tap delay settings,
adjusting this ratio
enables you to increase
or decrease the speed of
the rhythm pattern. You
do not need to adjust
each tap setting.
Specifies amount of
audio signal returned to
delay input.
Selects Stereo mode or
PingPong mode.
Specifies low shelving This filter is applied to
filter frequency. feedback loops.
Specifies low shelving This filter is applied to
filter gain. feedback loops.
Specifies high shelving This filter is applied to
filter frequency. feedback loops.
Specifies high shelving This filter is applied to
filter gain. feedback loops.
Specifies delay time of With Off, no audio sig -
delay tap. nal will be output from
this tap delay.
Specifies delay time of With Off, no audio sig -
delay tap. nal will be output from
this tap delay.
TASCAM DM-4800 Effect list
Remarks
Remarks
1