Rehearse; Displays; Auto Setup; Automation Engine - Tascam DM-3200 Manual

Rehearse

Rehearse is a special status that works with Write,
Trim and Static modes. Rehearse allows you to

Displays

The automation display screens on the TASCAM
DM described below are used for the following pur-
poses:
• Enabling/disabling the automation system
• Setting operational preferences
• Setting the master Auto Fade Out time
• Displaying used/available memory

AUTO SETUP

Check boxes are enabled/disabled by moving the
cursor to the check box and pressing the
Time values are entered by moving the cursor to the
desired box, changing the value with the wheel then
pressing the ENTER key. Time values flash until con-
firmed with the key.
ENTER
To access the automation displays, press the
key. Repeatedly pressing the
MATION
TION key (or using the POD 1 encoder and switch)
toggles between the displays.

AUTOMATION ENGINE

enables/disables the TASCAM DM's automation
system.
When enabled, AUTO is displayed in the upper left of
the display with the currently selected channel, in all
mixer displays.
No automation data will be recorded or played back
when the automation system is disabled.
3 – Automation overview : Displays

Figure 6: AUTO SETUP screen

ENTER key.
AUTO-
AUTOMA-
This on-screen button
practice or experiment with mix moves without
recording them.
• Over-riding the automation system's automatic
mode switching
• Copy/paste of configuration between channels
• Mix file management
In all automation displays, the cursor is moved by
using the cursor keys, located to the lower right of
the display.

AUTO STORE

The AUTO STORE
disables automatic storage of mix data.
When turned on, there are two sub-options:
WRITE , which throws away the previous mix data, and
KEEP , which keeps the previous mix data as a backup.

KEEP CONFIRMATION

box will ask for confirmation before performing a
Keep operation. A Keep operation saves a copy of
the current mix, pushing older mixes "down the
stack". If all space for mixes is is taken, the Keep
operation will delete the oldest (unprotected) mix.
All mixes saved using Keep are numerically
sequenced with highest numbers being the latest
mixes.
The default value of this check box is on (keep con-
firmation is enabled).

AUTOMATION MODE MULTI PASS

mally, the mixer exits Global Write or Global Trim
mode when it is no longer receiving timecode.
When this check box is enabled, the mixer remains in
Global Write or Global Trim mode until the mode is
TASCAM DM Automation Guide
option enables or
OVER-
When enabled, a pop-up
Nor-
11