C
H A P T E R
Here are examples of using the Web Configurator to set up features in the
ZyWALL. See also
Note: The tutorials featured here require a basic understanding of connecting to
and using the Web Configurator, see
descriptions of individual screens, see
7.1 How to Configure Interfaces, Port Roles, and
Zones
This tutorial shows how to configure Ethernet interfaces, port roles, and zones for
the following example configuration (see
configuration).
• You want to be able to apply security settings specifically for all VPN tunnels so
you create a new VPN zone.
• The wan1 interface uses a static IP address of 1.2.3.4.
• The opt interface is used for a protected local network. It uses IP address
192.168.4.1 and has a DHCP server. Add it to the LAN zone so all of the LAN
zone's security policies apply to it.
ZyWALL USG 100/200 Series User's Guide
Chapter 8 on page 185
Chapter 3 on page 47
Technical Reference on page
Section 6.2.2 on page 94
Tutorials
for an example of configuring L2TP VPN.
for details. For field
7
221.
for the default
115