• Keep Enable NAT Loopback selected to allow users connected to other
interfaces to access the HTTP server (see
details).
Figure 133 Creating the NAT Entry
7.12.3 Set Up a Firewall Rule
The firewall blocks traffic from the WAN zone to the DMZ zone by default so you
need to create a firewall rule to allow the public to send HTTP traffic to IP address
1.1.1.1 in order to access the HTTP server. If a domain name is registered for IP
address 1.1.1.1, users can just go to the domain name to access the web server.
ZyWALL USG 100/200 Series User's Guide
Chapter 7 Tutorials
NAT Loopback on page 423
for
169