ZyXEL Communications ZyWALL USG 200 Series User Manual page 53

Table 6 Configuration Menu Screens Summary (continued)
FOLDER OR
LINK
Interface
Routing
Zone
DDNS
NAT
HTTP Redirect
ALG
IP/MAC
Binding
Auth. Policy
Firewall
VPN
IPSec VPN
ZyWALL USG 100/200 Series User's Guide
TAB FUNCTION
Port Role Use this screen to set the ZyWALL's flexible ports
as LAN1, WLAN, or DMZ.
Ethernet Manage Ethernet interfaces and virtual Ethernet
interfaces.
PPP Create and manage PPPoE and PPTP interfaces.
Cellular Configure a cellular Internet connection for an
installed 3G card.
WLAN Configure settings for an installed wireless LAN
card.
VLAN Create and manage VLAN interfaces and virtual
VLAN interfaces.
Bridge Create and manage bridges and virtual bridge
interfaces.
Auxiliary Manage the AUX port.
Trunk Create and manage trunks (groups of interfaces)
for load balancing and link High Availability (HA).
Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
RIP Configure device-level RIP settings.
OSPF Configure device-level OSPF settings, including
areas and virtual links.
Configure zones used to define various policies.
Profile Define and manage the ZyWALL's DDNS domain
names.
Set up and manage port forwarding rules.
Set up and manage HTTP redirection rules.
Configure SIP, H.323, and FTP pass-through
settings.
Summary Configure IP to MAC address bindings for devices
connected to each supported interface.
Exempt List Configure ranges of IP addresses to which the
ZyWALL does not apply IP/MAC binding.
Define rules to force user authentication.
Firewall Create and manage level-3 traffic rules.
Session Limit Limit the number of concurrent client NAT/firewall
sessions.
VPN Connection Configure IPSec tunnels.
VPN Gateway Configure IKE tunnels.
Concentrator Configure VPN concentrators (hub-and-spoke
VPN).
Chapter 3 Web Configurator
53