ZyXEL Communications ZyWALL USG 200 Series User Manual page 788

Chapter 46 Certificates
The following table describes the labels in this screen.
Table 223 Configuration > Object > Certificate > Trusted Certificates > Edit
LABEL
Name
Certification Path
Refresh
Enable X.509v3
CRL Distribution
Points and OCSP
checking
OCSP Server
URL
ID
Password
LDAP Server
Address
Port
ID
Password
Certificate
Information
788
DESCRIPTION
This field displays the identifying name of this certificate. You can
change the name. You can use up to 31 alphanumeric and
;'~!@#$%^&()_+[]{}',.=- characters.
Click the Refresh button to have this read-only text box display the
end entity's certificate and a list of certification authority certificates
that shows the hierarchy of certification authorities that validate the
end entity's certificate. If the issuing certification authority is one that
you have imported as a trusted certificate, it may be the only
certification authority in the list (along with the end entity's own
certificate). The ZyWALL does not trust the end entity's certificate and
displays "Not trusted" in this field if any certificate on the path has
expired or been revoked.
Click Refresh to display the certification path.
Select this check box to have the ZyWALL check incoming certificates
that are signed by this certificate against a Certificate Revocation List
(CRL) or an OCSP server. You also need to configure the OSCP or
LDAP server details.
Select this check box if the directory server uses OCSP (Online
Certificate Status Protocol).
Type the protocol, IP address and pathname of the OCSP server.
The ZyWALL may need to authenticate itself in order to assess the
OCSP server. Type the login name (up to 31 ASCII characters) from
the entity maintaining the server (usually a certification authority).
Type the password (up to 31 ASCII characters) from the entity
maintaining the OCSP server (usually a certification authority).
Select this check box if the directory server uses LDAP (Lightweight
Directory Access Protocol). LDAP is a protocol over TCP that specifies
how clients access directories of certificates and lists of revoked
certificates.
Type the IP address (in dotted decimal notation) of the directory
server.
Use this field to specify the LDAP server port number. You must use
the same server port number that the directory server uses. 389 is
the default server port number for LDAP.
The ZyWALL may need to authenticate itself in order to assess the
CRL directory server. Type the login name (up to 31 ASCII characters)
from the entity maintaining the server (usually a certification
authority).
Type the password (up to 31 ASCII characters) from the entity
maintaining the CRL directory server (usually a certification
authority).
These read-only fields display detailed information about the
certificate.
ZyWALL USG 100/200 Series User's Guide