Related Manuals for Kramer DS Vision® 3000
Summary of Contents for Kramer DS Vision® 3000
-
Page 1: User Manual
USER MANUAL MODEL: DS Vision® 3000 CAT 5 Range Extender System P/N: 2900-300282 Rev 1... -
Page 2: Table Of Contents
Contents Introduction Getting Started Achieving the Best Performance Safety Instructions Recycling Kramer Products Overview System Overview Transmitter and Broadcaster Receivers Receiver DCL Line Splitter Long LEDs Connecting the DS Vision® 3000 Broadcaster/Transmitter Connections Receiver/Receiver L Connections Receiver DCL Connections Connecting CATx Cables... -
Page 3: Introduction
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Products. Congratulations on purchasing your Kramer DS Vision® 3000, which is ideal for the following typical applications: •... -
Page 4: Getting Started
Achieving the Best Performance To achieve the best performance: • Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) •... -
Page 5: Safety Instructions
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. -
Page 6: Overview
Overview The DS Vision® 3000 family is a range extender system for computer graphics video signals up to 1080p, stereo audio and bidirectional RS −232. The system can distribute the input signals over CAT 5 cable to hundreds of displays. Specifically the DS Vision®... -
Page 7: Transmitter And Broadcaster
Figure 1: DS Vision 3000 System Overview Transmitter and Broadcaster This table defines the models: Kramer Kramer Part Full Description Model Number DSV3K-T (0VS50005) 50-0000509011 Minicom DS Vision 3000 Transmitter 1-port DSV3K-B8 (0VS50003) 50-0000489011 Minicom DS Vision 3000 Broadcaster 8-ports... -
Page 8: Receivers
Figure 2: Broadcaster Unit - 8 Ports Receivers The receivers come in the following models: • Receiver - P/N 0VS50010. Reaches up to 110m (330ft) from transmitter/broadcaster • Receiver L (long) - P/N 0VS50001. Reaches up to 300m (1,000ft) from transmitter/broadcaster. -
Page 9: Receiver Dcl
Receiver DCL The receiver DCL (Dual Cascade Long) P/N 0VS50006 has the following features: • Connects to 2 monitors with each having separate video, audio and serial control • Receiver DCL is cascadable – it has a pass-through port for connecting more receivers/ receivers L/ receivers DCL/ line splitter L •... -
Page 10: Line Splitter Long
Line Splitter Long Add line splitters L(ong) to use for clusters or to increase the number of receivers in the system. There is an option to cascade line splitters to line splitters. Figure 5 illustrates the line splitter L ports. Notes: The last cascaded line splitter long must not be more than 300m (1000ft) from the transmitter or broadcaster. -
Page 11: Connecting The Ds Vision® 3000
Connecting the DS Vision® 3000 Figure 6 illustrates a sample configuration and its connections. Figure 6: Connection Diagram DS Vision® 3000 - Connecting the DS Vision® 3000... -
Page 12: Broadcaster/Transmitter Connections
Broadcaster/Transmitter Connections 1. Connect the broadcaster/transmitter Video In port to the computer’s video card with a video cable. 2. Connect the broadcaster/transmitter Serial In port to the computer’s serial port with a serial extender cable. 3. Connect the broadcaster/transmitter Audio In port to the computer’s line out port with a stereo audio cable. -
Page 13: Connecting To The Power Supply
4.4.1 Connecting the Broadcaster/Transmitter • Connect CATx cables to the system ports of the broadcaster/transmitter and the system In ports of receivers/L/DCL or line splitter L. 4.4.2 Connecting/Cascading a Line Splitter Long • Connect CATx cables to the system out ports of the line splitter long and the system in ports of receivers/L/DCL or further line splitters Long. -
Page 14: Technical Specifications
Technical Specifications RESOLUTION: Up to 1920x1440 @60Hz (depending on cable length) I/O VIDEO SIGNALS: Analog red, green, blue, 75Ω 0.7Vpp SYNC: TTL compatible HORIZONTAL/VERTICAL SYNC: Positive/negative SYSTEM CABLE: CAT 5/5e/6/7 UTP/FTP cable, 2x4x24AWG solid wire MAX. RANGE: 300m (1000ft) SKEW COMPENSATION: Up to 63nsec DDC: Complies with VESA DDC−2 specification... - Page 16 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the DS Vision® 3000 and is the answer not in the manual?
Questions and answers