Configuring Class Setup; Figure 137 Bandwidth Management: Class Setup; Table 94 Bandwidth Management: Class Setup - ZyXEL Communications ZyWALL 2Plus User Manual

16.11 Configuring Class Setup

The Class Setup screen displays the configured bandwidth classes by individual interface.
Select an interface and click the buttons to perform the actions described next. Click "+" to
expand the class tree or click "-" to collapse the class tree. Each interface has a permanent root
class. The bandwidth budget of the root class is equal to the speed you configured on the
interface (see
sub-class layers for the root class.
To add or delete child classes on an interface, click ADVANCED > BW MGMT > Class
Setup. The screen appears as shown (with example classes).

Figure 137 Bandwidth Management: Class Setup

The following table describes the labels in this screen.

Table 94 Bandwidth Management: Class Setup

LABEL
Interface
Bandwidth
Management
Add Sub-Class
Chapter 16 Bandwidth Management
Section 16.10 on page 275
DESCRIPTION
Select an interface from the drop-down list box for which you wish to set up classes.
Bandwidth management controls outgoing traffic on an interface, not incoming. So,
in order to limit the download bandwidth of the LAN users, set the bandwidth
management class on the LAN. In order to limit the upload bandwidth, set the
bandwidth management class on the corresponding WAN interface.
This field displays whether bandwidth management on the interface you selected in
the field above is enabled (Active) or not (Inactive).
Click Add Sub-class to add a sub-class.
ZyWALL 2 Plus User's Guide
to configure the speed of the interface). Configure
277