Figure 211 Menu 1.1.1: Ddns Edit Host; Table 141 Menu 1.1.1: Ddns Edit Host - ZyXEL Communications ZyWALL 2Plus User Manual

Figure 211 Menu 1.1.1: DDNS Edit Host

Hostname= MyDevice
DDNS Type= DynamicDNS
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
Let DDNS Server Auto Detect= No
Use User-Defined= No
Use WAN IP Address= N/A
The following table describes the fields in this screen.

Table 141 Menu 1.1.1: DDNS Edit Host

FIELD
Host Name
DDNS Type
Enable
Wildcard
Option
Enable Off Line
Option
IP Address
Update Policy:
Chapter 24 SMT Menu 1 - General Setup
Menu 1.1.1 - DDNS Edit Host
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter your host name in this field.
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have the
Dynamic DNS service.
Select StaticDNS if you have the Static DNS service.
Select CustomDNS if you have the Custom DNS service.
Your ZyWALL supports DYNDNS Wildcard. Press [SPACE BAR] and then [ENTER] to
select Yes or No. This field is N/A when you choose DDNS client as your service
provider.
This field is only available when CustomDNS is selected in the DDNS Type field.
Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected,
www.dyndns.org/
traffic is redirected to a URL that you have previously specified
(see www.dyndns.org for details).
You can select Yes in either the Let DDNS Server Auto Detect field (recommended)
or the Use User-Defined field, but not both.
With the Let DDNS Server Auto Detect and Use User-Defined fields both set to No,
the DDNS server automatically updates the IP address of the host name(s) with the
ZyWALL's WAN IP address.
DDNS does not work with a private IP address. When both fields are set to No, the
ZyWALL must have a public WAN IP address in order for DDNS to work.
ZyWALL 2 Plus User's Guide
http://
379