Metric; Pptp Encapsulation; Table 157 Fields In Menu 11.1 (Pppoe Encapsulation Specific) - ZyXEL Communications ZyWALL 2Plus User Manual

28.3.2.3 Metric

See Section 7.2 on page 109

Table 157 Fields in Menu 11.1 (PPPoE Encapsulation Specific)

FIELD
Service Name
Authen
Telco Option
Allocated
Budget
Period(hr)
Schedules
Nailed-Up
Connection
Session
Options
Idle Timeout

28.3.3 PPTP Encapsulation

If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen.
Please see Section 3.2.1.3 on page 72
Chapter 28 Remote Node Setup
for details on the Metric field.
DESCRIPTION
If you are using PPPoE encapsulation, then type the name of your PPPoE service
here. Only valid with PPPoE encapsulation.
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when requested by this
remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
The field sets a ceiling for outgoing call time for this remote node. The default for this
field is 0 meaning no budget control.
This field is the time period that the budget should be reset. For example, if we are
allowed to call this remote node for a maximum of 10 minutes every hour, then the
Allocated Budget is (10 minutes) and the Period(hr) is 1 (hour).
You can apply up to four schedule sets here. For more details please refer to
38 on page 495.
This field specifies if you want to make the connection to this remote node a nailed-up
connection. More details are given earlier in this section.
Type the length of idle time (when there is no traffic from the ZyWALL to the remote
node) in seconds that can elapse before the ZyWALL automatically disconnects the
PPPoE connection. This option only applies when the ZyWALL initiates the call.
for information on PPTP.
ZyWALL 2 Plus User's Guide
Chapter
407