Table 195 Feature Specifications - ZyXEL Communications ZyWALL 2Plus User Manual

Table 194 Firmware Features (continued)
Other Protocol Support
Other Features

Table 195 Feature Specifications

FEATURE
Number of Static DHCP Table Entries
Number of Static Routes
Number of Port Forwarding Rules
Number of NAT Sessions
Number of Address Mapping Rules
Number of Source or Destination IP Address Entries in a Firewall Rule
Number of IPSec VPN Tunnels/Security Associations
Number of Bandwidth Management Classes
Number of Bandwidth Management Class Levels
Number of DNS Address Record Entries
Number of DNS Name Server Record Entries
Cable Pin Assignments
In a serial communications connection, generally a computer is DTE (Data Terminal
Equipment) and a modem is DCE (Data Circuit-terminating Equipment). The ZyWALL is
DCE when you connect a computer to the console port. The ZyWALL is DTE when you
connect a modem to the dial backup port.
The console cable and dial backup cable each have an RJ-45 connector and a DB-9 connector.
The pin layout for the DB-9 connector end of the cables is as follows.
1. Pins 2,3 and 5 are used.
Appendix A Product Specifications
PPP (Point-to-Point Protocol) link layer protocol.
Transparent bridging for unsupported network layer protocols.
DHCP Server/Client/Relay
RIP I/RIP II
ICMP
SNMP v1 and v2c with MIB II support (RFC 1213)
IP Multicasting IGMP v1 and v2
IGMP Proxy
UPnP
IEEE 802.1X
Transparent Firewall (Bridge mode)
Dynamic DNS
IP Alias
Static Routes
1
ZyWALL 2 Plus User's Guide
SPECIFICATION
32
12
12
3000
10
20
2
10
1
30
16
511