Editing Tcp/Ip Options; Figure 216 Menu 11.2.1: Remote Node Ppp Options; Table 147 Menu 11.2.1: Remote Node Ppp Options - ZyXEL Communications ZyWALL 2Plus User Manual

Internet security appliance
Hide thumbs Also See for ZyWALL 2Plus:
Table of Contents

Advertisement

ZyWALL 2 Plus User's Guide

Figure 216 Menu 11.2.1: Remote Node PPP Options

This table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.

Table 147 Menu 11.2.1: Remote Node PPP Options

FIELD
Encapsulation
Compression
Once you have configured this menu, press [ENTER] at the message "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.

25.8 Editing TCP/IP Options

Move the cursor to the Edit IP field in menu 11.2, then press [SPACE BAR] to select Yes.
Press [ENTER] to open Menu 11.2.2 - Remote Node Network Layer Options.
388
Menu 11.2.1 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select CISCO PPP if your Dial Backup
WAN device uses Cisco PPP encapsulation, otherwise select Standard PPP.
Press [SPACE BAR] and then [ENTER] to select Yes to enable or No to disable Stac
compression.
Chapter 25 WAN and Dial Backup Setup

Advertisement

Table of Contents
loading

Table of Contents