Uploading Firmware And Configuration Files; Firmware File Upload; Figure 299 Successful Restoration Confirmation Screen - ZyXEL Communications ZyWALL 2Plus User Manual

ZyWALL 2 Plus User's Guide
4 After a successful restoration you will see the following screen. Press any key to restart
the ZyWALL and return to the SMT menu.

Figure 299 Successful Restoration Confirmation Screen

35.5 Uploading Firmware and Configuration Files

This section shows you how to upload firmware and configuration files. You can upload
configuration files by following the procedure in
instructions in Menu 24.7.2 - System Maintenance - Upload System Configuration File
(for console port).
Note: WARNING!
Do not interrupt the file transfer process as this may PERMANENTLY
DAMAGE YOUR ZyWALL.

35.5.1 Firmware File Upload

FTP is the preferred method for uploading the firmware and configuration. To use this feature,
your computer must have an FTP client.
When you telnet into the ZyWALL, you will see the following screens for uploading firmware
and the configuration file using FTP.
476
Save to ROM
Hit any key to start system reboot.
Chapter 35 Firmware and Configuration File Maintenance
Section 35.4 on page 473 or by following the