Main Menu - ZyXEL Communications ZyWALL 2Plus User Manual

Table 134 Main Menu Commands
OPERATION KEYSTROKES
Move the
cursor
Entering
information
Required
fields
N/A fields
Save your
configuration
Exit the SMT

23.3.1 Main Menu

After you enter the password, the SMT displays the Main Menu, as shown next.
Chapter 23 Introducing the SMT
DESCRIPTION
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You can
[DOWN] arrow also use the [UP]/[DOWN] arrow keys to move to the previous and
keys the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key to
move to the bottom of a menu.
Fill in, or press You need to fill in two types of fields. The first requires you to type
[SPACE BAR], in the appropriate information. The second allows you to cycle
then press through the available choices by pressing [SPACE BAR].
[ENTER] to select
from choices.
<? > All fields with the symbol <?> must be filled in order be able to
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data on
the screen will take you, in most cases to the previous menu.
Make sure you save your settings in each screen that you
configure.
Type 99, then Type 99 at the main menu prompt and press [ENTER] to exit the
press [ENTER]. SMT interface.
ZyWALL 2 Plus User's Guide
369