The type of data will already be default to "ALL-DATA" so no action
is required.
to start the data save. The legend
"EXT-MEM SAVING !!" will be displayed with the exclamation
marks flashing to indicate that saving is in progress. The save
process will take over 20 seconds to complete. Once the save is
complete, the LCD will revert to its previous display (VFO, scan or
search etc).
Now repeat the ALL-DATA save to EM8200 locations 1, 2 and 3 to
complete the formatting process.
18-6-2 EM8200 ALL-DATA save and load
Before loading data from the EM8200 it is recommended that ALL DATA save be used to make a copy of
the AR8200 into one of the EM8200 memory locations (i.e. keep one as a temporary copy of your current
AR8200 data).
Save ALL-DATA
Access the COPY EXT-MEM menu using the key sequence
Select the "SAVE" option,
load and save. Next select the EM8200 bank you wish to save
using the
keys (0, 1, 2 or 3). The type of data will already be
default to "ALL-DATA" so no action is required.
to start the data save. The legend "EXT-MEM SAVING !!" will be displayed with the
exclamation marks flashing to indicate that saving is in progress. The save process will take over 20
seconds to complete. Once the save is complete, the LCD will revert to its previous display (VFO, scan
or search etc).
Load ALL-DATA
It is presumed that you have already saved ALL DATA to one of the four EM8200 memory locations.
Make sure that global write protect is not set or the data load will be unsuccessful and no data will be
loaded.
Access the COPY EXT-MEM menu using the key sequence
Select the "LOAD" option,
bank you wish to load using the
"ALL-DATA" so no action is required.
to start the data load. The legend "EXT-MEM LOADING !!" will be displayed with the
exclamation marks flashing to indicate that loading is in progress.
.
to toggle between
to toggle between load and save. Next select the EM8200
keys (0, 1, 2 or 3). The type of data will already be default to
Section 18-6-1, 18-6-2
.
129