Table of Contents
Advertisement
Advanced Menu
ADVANCED
APPLICATION
CB PROGRAMS
COMMUNICATION
DATE/TIME
DEVICE
INPUTS
LIMITS
The Advanced Menu displays various submenus.
Not all submenus can be seen on the screen at one
time. Scroll up or down to see additional submenus.
To select the desired submenu, press:
1. Up/Down to move.
2. Enter to select.
NOTE: The Advanced Menu has more submenus
than can appear on the screen at once. Keep
scrolling up or down to see all the options.
(Advanced) Application Options
APPLICATION
DEGREES SCALE: °F
APP:
FAN COIL
OPT: 4-PIPE
ADDITIONAL SETUP
DAMPER
FAN
HUMIDITY
SENSORS
VALVE
To change ° F or C, preprogrammed application type,
and options, press:
1. Up/Down to move among entries.
2. Enter to select.
3. Right/Left to move among value fields.
4. Up/Down to increment/decrement value.
The type of application (as well as the model of
FlexStat) affects the context-sensitive options under
Additional Setup.
BAC-10000 Series
ADDITIONAL SETUP
Auxiliary Heat (Heat Pump Only)
AUX HEAT SETUP
AUX HEAT:
DELAY (MINS): 60
Damper Setup
DAMPER SETUP
ECON:
MODULATING
MIN POSITION (%): 10
CNTRL (0–100%): 2–10 V
ECON ENBLE TEMP: 55° F
LOW LIMIT ALARM: 45° F
NOTE: If the Economizer option is selected when
there is no mixed air temperature sensor
connected, a Low Limit Alarm will result.
See
Alarms on page
Fan Setup
SPEEDS:
OFF DELAY (SECS): 180
UNOCC: AUTO
OCC: AUTO
NOTE: For a Fan Fail Alarm, see
page 6
and
Humidity Setup
HUMIDITY SETUP
DEHUMIDIFICATION
HUMIDIFICATION
NOTE: If a dehumidification option is enabled, the
Space Humidity Alarm will also be enabled.
See
Alarms on page
5
COMP LOCKOUT
11.
FAN SETUP
CONSTANT SPEED
Sensor Setup on
Alarms on page
11.
DEHUMIDIFICATION
DEHUM:
ENABLE
ALLOW HTG DEHUM: NO
DEHUM SETPT: 60%RH
DEHUM DEADBAND: 5%RH
11.
Operation Guide, Rev. J
Advertisement
Table of Contents
