(Advanced) Trend Logs; (Advanced) Test - KMC Controls FlexStat BAC-10000 Series Operation Manual

(Advanced) Trend Logs

TREND LOGS
TRUE
TREND 1:
TREND 2: TRUE
TREND 3: FALSE
TREND 4: FALSE
TREND #1
TREND 5: FALSE
SPACE TEMPERATURE LOG
TREND 6: FALSE
OBJECT REF: AI1
TREND 7: FALSE
LOG ENABLE: TRUE
INTERVAL (MINS): 10
STOP W/FULL: FALSE
RESET COUNT: NO
COUNT: 256
TOTAL CNT: 613
VIEW LOG BUFFER
NOTE: Space temperature (AI1) is the default trend
log #1. If AI2 is configured for discharge air
temperature, that will become the default
trend log #2. See
To set the desired object to track, press:
1. Up/Down to move among entries.
2. Enter to select.
The trend log buffer may be viewed by scrolling
down and selecting View Log Buffer. The buffer may
also be viewed from the Main Menu by scrolling
down to the Trend Viewer
NOTE: The BACnet standard for log intervals
is hundredths of seconds. The simplified
display on the FlexStat converts the value
to minutes. However, BACstage
TotalControl
®
seconds but in different ways. For a "10"
(minute) interval on a FlexStat display,
TotalControl would show "00:10:00.00"
(hours:minutes:seconds.hundredths of
seconds) and BACstage would show
"60000" (hundredths of seconds) instead.
NOTE: If applicable to the model, the humidity
sensor is AI5 and the motion sensor is
BI6, which can also be configured for trend
logs. See the BAC-10000 Series Application
Guide (P/N 913-019-03) or relevant BAC-
10000 Series Installation Guide for other
desired input and output objects in an
application.
BAC-10000 Series
TL #1–SPACE TEMP
APR17 1:27PM, 71.4
APR17 2:27PM, 71.5
APR17 3:27PM, 71.6
APR17 4:27PM, 71.8
APR17 5:27PM, 76.3
APR17 6:27PM, 81.2
APR17 7:27PM, 82.3
Sensor Setup on page
(see page 13).
and
™
do display hundredths of

(Advanced) Test

LCD/KEY TEST
The test menu merely tests the display's pixels and
key functions.
1. Up/Down to move among entries.
2. Enter to select and exit.
6.
10
TEST
Operation Guide, Rev. J