Table of Contents
Advertisement
Watching DVD Video (WinDVD)
The playback screen appears to be blurred, white, and jumpy
Right-click the WinDVD screen, and click [Setup] - [Video] to display the [Color Preset]
setting screen, and then set [Color Preset] to [Custom].
To change color settings in WinDVD, click
and set [Brightness], [Contrast], and [Color] on the sub-panel.
When battery operation time has become short:
Set [Deinterlace] to [Auto]. If this is set to [Advanced], the CPU usage rate increases, and
more battery power is consumed.
(Click
on the WinDVD control panel, then click [Display] to show the sub-panel for
changing the [Deinterlace] setting.)
Changing power settings
While a video is playing on WinDVD, the [Power schemes] in [Power Options Properties]
switch to [Intervideo WinDVD]. This will return to the original setting when the playback is
stopped.
If you have uninstalled WinDVD accidentally:
Reinstall it by following the steps below.
Log on to Windows with the administrator authority.
A
Set the Product Recovery DVD-ROM in the DVD-ROM & CD-R/RW drive.
B
Input [d:\windvd\setup.exe]
C
Follow the onscreen instructions and install WinDVD.
When the [License Agreement] screen
the terms.
*1
"d:" is the drive letter of the DVD-ROM & CD-R/RW drive. Change this to match the drive letter on
your own computer.
*2
Refer to "LIMITED USE LICENSE AGREEMENT" in the Operating Instructions for this computer.
on the WinDVD control panel, click [Color],
*1
in [start] - [Run] and click [OK].
*2
appears, click [Yes] if you agree to
83
Advertisement
Table of Contents
