Table of Contents
Advertisement
Setup Utility
NOTE
Cannot display the Setup Utility screen in simultaneous display.
By pressing the Fn+F3 key, display destinations can be changed either external
display or the internal LCD.
When [Password on boot] in the Setup Utility is set to [Disable]:
• When the computer is started up, entering a password is not necessary.
• When the Setup Utility is started up:
The password becomes necessary. This alternative can prevent the contents of the
Setup Utility from being changed.
If you fail to press the F2 key at the right moment, the Setup Utility will not start up. In
this case, let the computer fully boot up, and then perform a shutdown or restart from
Windows.
To close the Setup Utility:
Press the Esc key.
A
Select the exiting method from the [Exit] menu and press the Enter key.
B
Select [Yes] and then press the Enter key.
C
138
Advertisement
Table of Contents
