Table of Contents
Advertisement
Problems with Operation during Use
167
permitted direction. (For example, in a screen permitting only horizontal scrolling, a
vertical scroll operation results in horizontal scrolling.)
Some applications may not work properly
When switching to a different user with the Fast User Switching function, the following
problems may occur:
• Some applications may not work properly.
• Key combination with the Fn key may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
• The B's CLiP icon will no longer be shown on the notification area and CD-RW disk can-
not be written.
In this case, log off all users without using Fast User Switching function, and try the
operation once more. If the problem persists, restart the computer.
Some software applications installed after the time of purchase are not compatible with
Windows XP Service Pack 2. Refer to software maker's homepage or other sources.
For application software using a network, refer also to "Cannot start a network-used pro-
gram, or cannot share files or printers." (
page
162)
No response
Is there an input screen (e.g., password input screen at startup) hidden behind another
window? Use the Alt+Tab key to check for other windows being displayed.
Press the Ctrl+Shift+Esc key to open Task Manager and close the software
application which is not responding.
After sliding the power switch for at least four seconds to turn off the computer, turn on
again.
If Windows runs correctly, but the application software does not start, click [start] - [Control
Panel] - [Add or Remove Programs] and remove the failing application software, then
reinstall the application software.
Advertisement
Table of Contents
