Table of Contents
Advertisement
Setup Utility
Fn/Ctrl Key
• Select whether to switch the Fn key with the Ctrl key functions, and vice versa on the internal
keyboard.
• Do not attempt to replace the markings on the keys, or the keys themselves.
Display
• The display destination in cases where Windows is not running is set here.
• If an external display is not connected, all information will appear on the internal LCD even if
[External Monitor] is selected.
After Windows starts up, the screen is displayed on the display destination set in the following
menu.
[start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile] -
[Devices]
Display Expansion
• Select whether to have the display expanded when not using the native screen resolution.
CD/DVD Drive Power
• You can set the drive power to [On] or [Off] when the computer is started up.
• When set to [Off].
• From the next time you start the computer, you will be unable to start up from DVD-
ROM & CD-R/RW drive. The disk cover cannot be opened until Windows has
started. To start up from the DVD-ROM & CD-R/RW drive (give preference to [USB
CDD] (internal CD/DVD drive) in the [Boot] menu), set this to [On].
• If operations are resumed from hibernation mode while a disk is set, it may take
about 20 seconds for operations to resume.
Battery Charging Indicator
• Set the battery indicator to turn on or flash while the battery pack is recharging.
(An underline indicates the factory default settings)
142
Normal
Replace
External Monitor
Internal LCD
Disable
Enable
Off
On
On Continuous
Flashing
Advertisement
Table of Contents
