Problems With General Network - Panasonic CF-Y4 Reference Manual

Problems with General Network

Unable to connect to a network
Email, Internet, and Intranet material does not appear
The communications speed is low
Check that the network you are using ([Modem], [LAN] or [Wireless LAN]) is set to
[Enable] in the [Advanced] menu of the Setup Utility (
Restart the computer.
When using the computer as a network computer, some additional settings may have to
be made depending on the usage conditions. We recommend asking your system
administrator or the person in charge of the network.
If the hub unit link lump does not light up, one of the following problems may have
occurred.
• A problem or failure in the hub unit
• Incorrect cable type or incorrect connection
• A break in the cable
Set the speed to match the hub unit. (
When connected via a phone line:
• A contract with an Internet service provider (ISP) is required. Following directions given
by the ISP, check the TCP/IP settings.
When connected via a LAN:
• A contract with an ISP, or an application to the network system administrator is required.
• Following directions given by the ISP or network system administrator, make the
protocol and other settings.
• Are the LAN cables correctly connected?
When connected via a wireless LAN:
See the item "Problems with Wireless LAN" (
Setting [CPU Idle Setting] to [Performance] may improve the communication speed.
See "A device connected to a PC Card does not operate correctly" (
page 143).
page 126)
page 190).
188
page 186).