Show Or Set System Configuration - N-Tron 708TX User Manual & Installation Manual

CLI Commands, Continued...

Show or Set System Configuration

Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2013-06-21)
System
Show or set System configuration. If no parameters are specified, this command will
show the System configuration (same as -show parameter).
system [-show] [-name label] [-browser state]
-show
Show configuration.
-name label
Set the switch name.
-browser state
Set the browser access status to e(nabled) or d(isabled).
N-TRON/Admin> system –name "Private switch" –browser disabled
IP Configuration : Static
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1
MAC Address : 00:07:af:fb:fa:40
System Up Time : 0 days, 17 hours, 10 mins, 56 secs
Name : Private switch
Contact : N-Tron Admin
Location : Mobile, AL
Browser Access : Disabled
Changes have been made that have not been saved.
...
A switch name may only contain alphanumeric, space, ':', '-', '_', and '#' characters, and
may not begin with a number, space, or underscore. A name with embedded space
characters must be enclosed in quotes.
36609
Page 138 of 154