Show Or Set System Configuration - N-Tron 7506GX2 User Manual & Installation Manual

CLI Commands, Continued...

Show or Set System Configuration

Command Name
Description
Syntax
Parameters
Examples
NOTES
(Revised 2011-07-21)
System
Show or set System configuration. If no parameters are specified, this command will
show the System configuration (same as -show parameter).
system [-show] [-name label] [-browser state]
-show
Show configuration.
-name label
Set the switch name.
-browser state
Set the browser access status to e(nabled) or d(isabled).
N-TRON/Admin> system –name "Private switch" –browser disabled
IP Configuration : Static
IP Address : 192.168.2.201
Subnet Mask : 255.255.252.0
Gateway : 192.168.1.1
MAC Address : 00:07:af:fb:a2:c0
System Up Time : 0 days, 23 hours, 25 mins, 19 secs
Name : Private switch
Contact : N-TRON Admin
Location : Mobile, AL
Temperature : 24 C, 75 F
Upper Threshold : 80 C, 176 F
Lower Threshold : -40 C, -40 F
Browser Access : Disabled
Changes have been made that have not been saved.
...
A switch name may only contain alphanumeric, space, ‗:', ‗-‗, ‗_', and ‗#' characters, and
may not begin with a number, space, or underscore. A name with embedded space
characters must be enclosed in quotes.
36609
Page 144 of 158