N-Tron 708TX User Manual & Installation Manual page 12

FRONT PANEL
From Top to Left:
RJ45 Ports
Fiber Ports
NOTE: The RJ45 data port has two LEDs located on each connector. The left LED indicates LINK status,
and the right LED indicates ACTIVITY.
LEDs: The table below describes the operating modes:
LED Color
GREEN
RED
OFF
GREEN
LNK
OFF
GREEN
ACT
OFF
(Revised 2013-06-21)
Auto Sensing 10/100 Base-TX Connections
100 Base-FX Connections (only on 708FX2 model)
LED lights when Power is supplied to the unit
Description
Power is ON
Power is ON and a fault condition exists
Power is OFF
10/100Mb Link between ports
No Link between ports
Data is active between ports
Data is inactive between ports
Page 12 of 154