Setting | Security - Eiki EIP-WSS3100 Owner's Manual

Setting | Security

Securtiy
Security
Change Password
Select Enter
Security
On: Choose "On" to use security verification when turning on the projector.
`
Off: Choose "Off" to be able to switch on the projector without password
`
verification.
Change Password
First time:
`
Press the ► button to set the password.
y
The password has to be 6 digits.
y
Use the ▲ or ▼ on the remote control to select your new password on the
y
screen and then press ► to confirm it.
Change Password:
`
Use the ▲ or ▼ on the remote control to enter your current password on the
y
screen and then press ► to confirm it.
Enter a new password (6 digits in length) then press
y
Enter the new password again and press
y
If the incorrect password is entered for 3 times, the projector will automatically
`
shut down.
If you have forgotten your password, please contact your local office for support.
`
N N
Password default value is "000000" (first time).
ote ote
Securtiy
On
Exit
Enter Security Code (6 digits)
Incorrect security code Re-enter again
Select Enter Exit
"Enter" to confirm it.
"Enter" to confirm it.
... English
29