Eiki EIP-WSS3100 Owner's Manual page 41

Projector Status and Control Page
Projector Status: There are 4 status: Standby, Warning up, Lamp On, Power
`
Auto Power Off: Auto Power Off can be set to Off(0) or 1~120 minutes. See "Auto
`
Alert Status: There are three error status: Lamp warning, Low lamp life, and
`
Ceiling Mount: Allows you to select the projector mode, depending on how
`
Source Select: The Source Select menu allows you to select your projector's
`
Color Mode: Select a mode to optimize the display image based on how the
`
Blank Screen: Select On/Off to hide/unhide the
`
Aspect Ratio: Allows you to select the aspect ratio to adjust how the image
`
Brightness: Select value to adjust the brightness of the image.
`
Contrast: Select value to adjust the display contrast.
`
Volume: Select the value (0~32) for the audio volume
`
Mute: Choose "On" to turn mute on. Choose "Off" to turn mute off.
`
Microphone Volume: Select the value (0~32) for the Microphone Volume.
`
Click the Auto Adjust button to adjust the settings automatically.
N N
ote ote
Click the Factory Reset button to restore the factory default settings.
English ... 40
Saving and Cooling. Click the Refresh button to refresh the
status and control settings.
Power Off (min)" function.
Temperature warning. Your projector might lock up in protection
mode if any of the alerts is activated. To exit protection mode, click
the Clear to clear the Alert Status before you could Power ON your
projector.
the projector is mounted. There are four projection modes:
Front, Front Ceiling, Rear and Rear Ceiling.See "Ceiling Mount"
function.
input source. You can select HDMI, VGA 1/VGA 2, S-Video and
Composite Video.
projector is being used. See "Color Mode" function.
appears.
screen picture.