On Screen Messages - Eiki EIP-WSS3100 Owner's Manual

Two images, Side-by-Side(Half) format
Select "3D" --> "3D Format" from OSD and choose "Side-by-Side(Half)" for
`
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 51.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
Select "3D" --> "3D Format" from OSD and choose "Side-by-Side(Half)" for
`
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 51.

On Screen Messages

Power off confirm
y
Power Off?
Press power key again.
Fan lock error
y
Warning! FAN LOCKED
The proejctor will switch off automatically.
No source found
y
VGA 1
No Source Found
Please refer Troubleshooting on page43.
Out of display range
y
VGA
Out of display range
Please refer Compatibility Mode on page48.
Over temperature
y
Warning! TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
... English
47