Remote Control Battery Installation - Eiki EIP-WSS3100 Owner's Manual

Remote Control Battery Installation

1. Press firmly and slide
the battery cover off.
To ensure safe operation, please observe the following precautions :
Use CR2025 type battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture or heat.
Do not drop the remote control.
If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.
Risk of an explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
2. Install new battery into the
compartment.
Remove the old battery
and install new one
(CR2025). Ensure that
the side with a "+" is
facing up.
3. Put the cover
back.
... English
19