Lamp Setting; Dynamic Black; High Altitude - Eiki EIP-WSS3100 Owner's Manual

Input
HDMI
VGA 1
VGA 2
S-Video
Composite
Select
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no
signal being sent to the projector. The projector will automatically power off when
the countdown has finished (in minutes).

Lamp Setting

Refer to page 33.

Dynamic Black

On: The pictures with the optimum contrast will be displayed by automatically
`
providing signal compensation to suit the pictures concerned.
Off: Turn off this function.
`
"Dynamic Black" is available when "Color Mode" is set to "Movie".
N N
ote ote
"Dynamic Black" is not available when "3D" or "Interactive" is enabled.
When "Dynamic Black" is available, "Lamp Power Mode" selection is not available.

High Altitude

On: The built-in fans run at high speed. Select this option when using the
`
projector at altitudes above 2500 feet/762 meters or higher.
Off: The built-in fans automatically run at a variable speed according to the
`
internal temperature.
Filters Remind (Hour)
Filters Remind (Hour): Set the filter reminder time
`
Cleaning Up Reminder: Select "Yes" to reset the dust filter hour counter after
`
Information
Display the projector information for model name, SNID, source, resolution, software
version, color space and aspect ratio on the screen.
English ... 32
Enter Exit
replacing or cleaning the dust filter.