Account Activation For Wireless Devices - Multitech MultiConnect rCell 100 Series User Manual

Hide thumbs Also See for MultiConnect rCell 100 Series:

Table of Contents

10.

You can mount the device to a flat surface, if desired.

Locate the groove on the bottom of the device.

Slide the mounting rod through the groove.

To secure the rod to the desired surface, place and tighten two screws in the holes on either end

of the mounting rod.

The dimensions illustration in this guide shows the mounting rod, as well as the dimensions for

placement of the screws.

Account Activation for Wireless Devices

Refer to Multi-Tech's Cellular Activation Web site at

information on activating your cellular modem.

If you need remote access to your MultiConnect over the Internet for remote configuration, ensure

Note:

that your wireless network provider has provisioned mobile terminated data and fixed or dynamic public IP

address in which they can configure the network to redirect any incoming connection to that predefined IP.

MultiConnect rCell 100 Series User Guide

http://www.multitech.com/activation.go

for

Table of Contents

Do you have a question about the MultiConnect rCell 100 Series and is the answer not in the manual?

Multiconnect rcell mtr-h6