Restriction Of The Use Of Hazardous Substances (Rohs) - Multitech MultiConnect rCell 100 Series User Manual

Restriction of the Use of Hazardous Substances (RoHS)

Multi-Tech Systems, Inc.
Certificate of Compliance
2011/65/EU
Multi-Tech Systems confirms that its embedded products comply with the chemical concentration
limitations set forth in the directive 2011/65/EU of the European Parliament (Restriction of the use of
certain Hazardous Substances in electrical and electronic equipment - RoHS)
These Multi-Tech products do not contain the following banned chemicals
Lead, [Pb] < 1000 PPM
Mercury, [Hg] < 1000 PPM
Hexavalent Chromium, [Cr+6] < 1000 PPM
Cadmium, [Cd] < 100 PPM
Polybrominated Biphenyl, [PBB] < 1000 PPM
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Environmental considerations:
Moisture Sensitivity Level (MSL) =1
Maximum Soldering temperature = 260C (in SMT reflow oven)
1 Lead usage in some components is exempted by the following RoHS annex, therefore higher lead
concentration would be found in some modules (>1000 PPM);
–Resistors containing lead in a glass or ceramic matrix compound.
MultiConnect rCell 100 Series User Guide
1 :
23