UNDERSTANDING YOUR TRIMMER
SAFETY AND INTERNATIONAL SYMBOLS
This operator' s manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator' s manual for complete safety, assembly, operating and maintenance and repair information.
WARNING: Indicates danger, warning or caution.
May be used in conjunction with other symbols or
WARNING: READ OPERATOR'S MANUAL:
Read the operator' s manual(s) and follow all warnings
and safety instructions. Failure to do so can result in
serious injury to the operator and/or bystanders.
WEAR EYE AND HEARING PROTECTION WARNING:
Thrown objects and loud noise can cause severe eye
injury and hearing loss. Wear eye protection meeting
ANSI Z87.1 standards and ear protection when
operating this unit. Use a full face shield when needed.
OIL : Refer to operator' s manual for the proper type of oil.
THROWN OBJECTS AND ROTATING CUTTER CAN
CAUSE SEVERE INJURY WARNING:
Do not operate without the cutting attachment shield in
place. Keep away from the rotating cutting attachment.
OTHER OPTIONAL ACCESSORIES MAY BE USED WITH YOUR UNIT
ALL RIGHTS RESERVED 2008-2009
ON/OFF STOP CONTROLS ON/START/RUN
ON/OFF STOP CONTROL OFF or STOP
KEEP SYSTANDERS AWAY WARNING:
Keep all bystanders, especially children and pets, at
least 50 feet (15 m) from the operating area.
HOT SURFACE WARNING
Do not touch a hot muf er, gear housing or cylinder. You
may get burned. These parts get extremely hot from opera -
tion. They remain hot for a short time after the unit turned o .
SHARP BLADE WARNING
Sharp blade on cutting attachment shield. To prevent
serious injury, do not touch the line cutting blade.