Ipsec Settings - Ricoh SP 311DNw User Manual

4. Configuring the Machine Using Utilities
When this is selected, communication will be encrypted with WPA2 (WiFi Protected Access 2).
Enter a value in [WPA Passphrase] that contains from 8 to 64 characters.
• [Mixed Mode WPA/WPA2]
When this is selected, communication will be encrypted with WPA (WiFi Protected Access) or
WPA2 (WiFi Protected Access 2). Enter a value in [WPA Passphrase] that contains from 8 to 64
characters.

IPsec Settings

[IPsec Global Settings] tab
• [IPsec Function]
Select whether to enable or disable IPsec.
• [Default Policy]
Select whether to allow for the default IPsec policy.
• [Broadcast and Multicast Bypass]
Select the services that you do not want to apply IPsec from the following:
[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
• [All ICMP Bypass]
Select whether to apply IPsec to ICMP packets (IPv4 and IPv6).
[IPsec Policy List] tab
Click the [IPsec Policy List] tab on the IP security settings page to display the list of registered IPsec
policies.
To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the
"IPsec Policy Settings" page. The following settings can be made on the "IPsec Policy Settings"
page.
IP Policy Settings
• [No.]
Specify a number between 1 and 10 for the IPsec policy. The number you specify will
determine the position of the policy in the IPsec Policy List.
• [Activity]
54