Toshiba Tecra A2-S316 Maintenance Manual page 83

2.4 System Board Troubleshooting
D port status Inspection items
F120h
FFFFh Completion
Check 1 If the D port status error code F11Ah is displayed, go to the 3.5" USB FDD
Troubleshooting Procedures in Section 2.5 or the 2.5" HDD Troubleshooting
Procedures in Section 2.6.
Check 2 If any other D port status error code is displayed, perform Procedure 3.
D port error statuses are following:
Error code
F160h
F161h
F162h
F163h
F11Eh
Satellite A50/TECRA A2 Maintenance Manual (960-478)
Table 2-3 D port status (9/9)
Process for CPU (Make the CPU clock to be set by
SETUP)
Waiting for the motor off of a disabled HDD
Final decision of USB FDD drive information
Post processing of PRE_BOOT_SETUP
Clearing PWRBTN_STS, Enabling the power button
Clearing IRT status
Updating of checksum for Runtime
Contents
Timer CH2 error
PIT error
PIC #1 error
PIC #2 error
Clock generator setting error
2 Troubleshooting Procedures
Details
2-29