Toshiba Tecra A2-S316 Maintenance Manual page 175

3.27 Floppy Disk Drive Utilities
4. DUMP program
(a) When DUMP is selected, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a drive type
If
1:FDD
Select drive number
(c) Select a drive number and the following message will be displayed. Select a format
type.
Format type select (1:2DD, 3:2HD) ?
(d) If
2:2HD
2HD media mode (1:1.20MB, 2:1.44MB, 3:1. 23MB) ?
(e) Select a format type and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(f) Insert a source disk and press any key and the following message will appear:
---Max. address ---
[ Track ] = XXXX
[
[ Sector] = XX
Track number ????
(g) Set the track number, the head number and the sector number you want to dump.
The system will access the disk and dump a list. Then the message shown in (k) will
appear.
(h) The following message will appear when selecting
Select drive number
(i) Select a drive number and the following message will be displayed.
---Max. address ---
[LBA ] = XXXXXXXXX
LBA number ????????
3-65
number. If 2:HDD is selected
is selected, the following message appears:
is selected, the following message appears. Select a media mode.
Head ] = XXX
, the display will go to step (h).
(1:A, 2:B) ?
2:HDD
(1:C, 2:D) ?
Satellite A50/TECRA A2 Maintenance Manual (960 -478)
3 Test and Diagnostics
in (a).