4.19 LCD Unit/FL Inverter
4.19 LCD Unit/FL Inverter
Removing the LCD unit/FL inverter
The follo wing describes the procedure for removing the LCD unit and FL inverter (See
Figure 4-37 to 4-40).
1. Peel off two mask seals from the front of the display mask and remove the following
screws .
2. Insert your fingers between the display mask and the LCD and remove the display
mask after unlatching the display mask.
Display Mask
Satellite A50/TECRA A2 Maintenance Manual (960-478)
M2.5x6B
THIN BIND screw
Figure 4-37 Removing Display Mask
4 Replacement Procedures
x2
Mask Seal
M2.5 6B THIN BIND
4-51