4 Replacement Procedures
3. Turn the computer face up. Open the display and disconnect the LCD cable and the
speaker cables (Blue, Red) from the connectors on the system board. Unlock the
connector and disconnect the touch pad cable from the system board.
4. Remove the following screws securing the display assembly.
PJ5600
LCD Cable
PJ3260
Touch Pad Cable
4-34
M2x8B
BIND screw
M2.5x8B
THIN BIND screw
M2x8B BIND
Figure 4-24 Removing Display Assembly (2)
x1
x1
M2.5x8B
THIN BIND
Left Speaker Cable (Blue)
Satellite A50/TECRA A2 Maintenance Manual (960-478)
4.11 Display Assembly
Right Speaker Cable (Red)
PJ6000
PJ6001