Pc Card - Toshiba Tecra A2-S316 Maintenance Manual

4 Replacement Procedures

4.2.2 PC Card

Removing the PC card
The following describ es the procedure for removing a PC card (See Figure 4-2).
CAUTION: Insert or remove the PC card in accordance with any instructions in the
PC card manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it. Then press the eject button
once more to eject the PC card.
2. Grasp the PC card and remove it.
Installing the PC card
The following describes the procedure for inserting a PC card (See Figure 4-2).
1. Make sure the eject button does not stick out.
2. Insert the PC card and press it until it is securely connected.
4-10
Figure 4-2 Removing PC Card
Satellite A50/TECRA A2 Maintenance Manual (960-478)
4.2 Battery Pack/PC Card
Eject Button
PC Card